2017-2020 F150 / RAPTOR 3.5 ECOBOOST FULL-BORE EXHAUST MANIFOLD SET
Unleash the Full Potential of your 2017-2020 Ford 3.5L Ecoboost F150 or Raptor with a set Full Bore Performance Manifolds from CR Performance.
- High performance larger runners provide 30% more flow area over stock with no restriction throughout the RPM range
- Ready to support over 850 HP of flow (Dyno Proven on E85)
3-5 lbs/min flow increase typical on performance use, further gains with upgraded turbos - Quicker spool times
- Removes restriction of cylinders with efficient D porting geometry
- Port matched to turbocharger turbine housing (Unlike OEM Manifolds)
- Thick wall durable High Sil Steel resists warping without cracking
- Dyno proven gains on completely stock truck with no tune of 23 RWHP 32 RW lb-ft peak with massive area under the curve at 368 RWHP & 428 ft-lbs
- Users can expect exponential further gains when matched with other performance products pushing flow past the stock manifold abilities or in combination with Custom Tuning for 2017-2020 Raptor, or Custom Tuning for 2017-2020 F150 3.5L Ecoboost, or 2019-2020 F150 "Limited" 3.5L Ecoboost.
Dyno Proven, Highest Flowing Manifold Set on the market, Bar None.
Note: Requires Spacers (CRP5001101-2-G2S) if used in combination with Garrett PowerMax Stage 2 (901654-5001W & 901655-5001W) Turbos. Without spacers, Clearance (Machining) Modifications will be needed to mount the Turbos.
About Livernois Motorsports
Livernois Motorsports & Engineering has become best-known for revolutionary tuning and high-end performance products for late model Ford, Mopar and GM vehicles. The company is proud of its deep roots in the automotive and motorsports industry dating back to its original founding in 1949. Since then the company has expanded its product line to include tuning and performance components for desert racing, SCCA and drag racing. Livernois Motorsports is proud to engineer, test and manufacture its products in the USA.
Included In The Kit:
- 1 x Performance Drivers Side Manifold
- 1 x Performance Passenger Side Manifold
- 16 x W712244-S300 / W719078-S900 – Manifold Stud F150 3.5L
- 16 x W701706-S440 – Grade 10 Locking Manifold Nut
- 1 x Install Manual
Additional OEM Gaskets & Hardware Required:
- 1x HL7Z-9448-B 2017-2020 DS F150 3.5L Manifold Gasket (L / DS)
- 1x HL7Z-9448-A 2011-2020 PS F150 3.5L Manifold Gasket (R / PS)
- 2x HL3Z-9T516-A 2017+ F150 3.5L Turbocharger Oil Inlet Feed Seal
- 2x FT4Z-6N652-E 2017+ F150 3.5L Turbocharger Oil Drain Seal #1
- 2x HL3Z-00815-A 2017+ F150 3.5L Turbocharger Oil Drain Seal #2
- 6x FT4Z-6N652-D 2017+ F150 3.5L Water Inlet & Outlet Tube Seal #1
- 4x HL3Z-6N652-A 2017+ F150 3.5L Water Inlet & Outlet Tube Seal #2
- 6x W715673-S900 2017+ Turbocharger Mounting Bolt F150 3.5L & Raptor
- 4x W520514-S440 2017+ Downpipe Nut F150 3.5L (Recommended)
(The following only required if the Downpipe adaptor is separated / New turbochargers are installed)
- 2x BL3Z-9450-A 2017+ F150 3.5L Down Pipe Gasket
- 4x W716667-S900 2017+ Downpipe Stud F150 3.5L
Additional OEM Requirements: 2017 F150 & RAPTOR
- 1x HL3Z-9448-C 2017 F150 3.5L Turbo Turbine Inlet Gasket (L / DS)
- 1x HL3Z-9450-A 2017 F150 3.5L Turbo Turbine Inlet Gasket (R / PS)
- 2018-2020 F150 & RAPTOR REQUIREMENTS
- 2x JL3Z-9450-A 2018+ F150 3.5L Turbo Turbine Inlet Gasket (L / DS) & (R / PS)
Ford OEM Manifold Numbers:
- HL3Z-9431-A, JL3Z-9431-C, JL7Z-9431-C
- HL3Z-9430-A, JL3Z-9430-C, JL7Z-9430-B
- 2017-2020 Ford F-150 King Ranch 3.5 Liter Turbocharged
- 2017-2020 Ford F-150 Lariat 3.5 Liter Turbocharged
- 2017-2020 Ford F-150 Limited 3.5 Liter Turbocharged
- 2017-2020 Ford F-150 Platinum 3.5 Liter Turbocharged
- 2018-2020 Ford F-150 Police Responder 3.5 Liter Turbocharged
- 2017-2020 Ford F-150 Raptor 3.5 Liter Turbocharged
- 2017-2020 Ford F-150 SSV 3.5 Liter Turbocharged
- 2017-2020 Ford F-150 XL 3.5 Liter Turbocharged
- 2017-2020 Ford F-150 XLT 3.5 Liter Turbocharged